Free Shipping $100 or more
We pay the sales tax
we accept all major credit cards

All our products are configurable and provide instant prices as you shop!

CUT BRASS SIGN LETTERS AND NUMBERS

Design, Price or Order Below

  • Five thicknesses and Four Beautiful finishes!
  • Brass letter finishes include Brushed, Oxidized and Polished
  • Letters and logos from 1 inch to 46 inches tall
  • Typical 7 to 10 day production time
  • Polished brass number
  • Oxidized Brass is chemically treated, then hand rubbed, to produce an antique look on the letter face - with black returns, then sprayed with a low gloss clear coating. Letters may vary slightly from order to order.
  • MANUFACTURER LIFETIME GUARANTEE!

Images shown above are of red metals, Brass, Bronze and Copper


PRODUCTION LEAD TIMES

Products usually ship in 7 to 10 working days

Products ship from either Minnesota, Virginia, Nevada or Texas whichever is closest to your location


PRICE AND ORDER HERE

Design single or multi-line signs with different sizes, fonts and colors and get instant previews

 Step 1: Enter Letters, Numbers
Line 1
 Step 2: Depth
 Step 3 Size
 Step 4: Style/Font
 Step 5: Color/Finish
Displays your letters in the chosen font
 Alignment
 Background
 Automatic
 Step 6: Mounting Hardware
Line 1
 Stud Length
 Wall Standoff
 Install Pattern
 Quantity
Total Character Count: 0
$0.00


Made here in the USA from Alloy C280, Commercial Brass Sheet, flat cut Brass metal letters are precision cut using CNC and waterjet technology to produce sharp edges and fine detail. We cut letters and logos from your ready made artwork or any font. Cut Brass letters add a sense of permenancy and class to any organization. All Brass letters are clear coated to prevent rust and tarnishing and all in typically 8 to 10 production days.

ALL OUR LETTERS AND LOGOS CARRY OUR LIFETIME GUARANTEE!

Mounting Hardware

no mount option

PLAIN MOUNT

The no-mount option is for when you want to glue letters directly to a flat surface using some kind of adhesive such as silicon caulk or liquid nails. The problem with this type of installation is that glue tends to squeeze out the edges and it can get very messy. Also, until your glue sets the letters can move around and for large letters that means you need to use long strips of masking tape to hold them in place.

Double face tape option

DOUBLE FACE TAPE MOUNT

Double sided tape for mounting large letters is not something you should do. If the letters come loose and fall, they could hurt someone and you could be sued. If outdoors they may pose a threat of theft. For this reason we do not offer double side tape mounts on any metal letters greater than 6" tall. For indoor use, the double sided tape mount should never be relied on entirely. Always add spots of silicon caulk or construction adhesive between the strips of tape to ensure that the letters will not fall if the tape dries out.

welded stud option

WELDED STUD MOUNT

Only available on 1/8" material thickness. Welded studs are prone to failure and we recommend the 1/4" material option with drilled and tapped studs that are removable. A stud mount of one form or another is required when ordering Polished or Anodized letters because the manufacturing process cannot be done without them.

removable stud option

REMOVABLE STUD MOUNT

The most popular mount with cut metal letters is the stud mount. Aluminum letters and numbers with removable or screw in studs, have been drilled and tapped on the back of the letter to accept the stud. The stud then gets glued into your mounting surface with silicon caulk or epoxy and holds the letters firmly in place. All stud type mounts require a mounting pattern to properly locate where to drill for the studs. A stud mount of one form or another is required when ordering Polished, Anodized or Powdercoated aluminum letters because the manufacturing process cannot be done without them.

edge mount option

EDGE STUD MOUNT

The bottom stud (or top or both!) gives you tapped holes in the edge of the letters for mounting in a vertical configuration. Metal letters have to be at least 3/8" thick to drill the holes and the letters have a minimum height of 4" Round letters will have flat bottoms and the same applies to top drilled letters. Metal letters 8" or more must by code have tie backs when used outside. We do not supply tie backs.

bottom or top rail option

BOTTOM/TOP RAIL MOUNT

Maximum length of rail is 8ft and not available for letters greater than 24" or less than 4". Metal letters are bolted through the rail into their edge and can be done either on the bottom, the top or both by request. This ordering form only provides a single rail on the bottom of the letters. For additional options please contact us for a quote.

combo-all mount option

BACK RAIL MOUNT

The double rail is mostly used for installation on metal corrugated buildings. It does detract from the look of the sign and is considered old school. In today's world a metal conduit raceway from home depot would look better to mount your letters on, and they come ready finished. Double rail mount has a maximum 8ft length and the rails are pre drilled to accept the letters ordered with screws that go through the rail into the letters. Assembly is required.

angle bracket mount option

ANGLE BRACKET MOUNT

Angle bracket is mounted to a flat surface like a roof parapet and the letters are attached to the rail at the bottom only. This mount will require tie backs if outside and over 8" letter height.



Aligns the display output(below) either left, right or center justified. This image is passed along in your order. Alignment requires 2 or more lines of text. TIP: You can also indent text by using spaces before and after the text to move the line text to the left or right.

Sets a background to the preview so that you can judge the text color against a background color. Backgrounds are not provided in the order. All letters come as individual letters or numbers. We do not make the sign, we help you to make your sign.

Cut letters can be made in pralmost any size including fractions and lowercase and punctuation. Letter sizes are based on the inch and incur a price change when fractional as in 3-1/2 inch would be iced at the 4" cost so try not to go over by small amounts because even 1/8 over any inch mark will put you to the next price inch.

Cut letters are made from solid sheet. The thicker they get the more expensive and heavier they get. Small sizes are restricted to a maximum 3/8" depth but larger sizes can go to a full inch. Thick letters in cut metals are not very cost effective and if you are looking at anything over 3/8" you should take a look at cast metal letters in bronze or aluminum, or Fabricated stainless and aluminum letters which can have depths up to 6"!

This product is size and font dependent. Small sizes under 2 inches can only be made in block fonts and all capitals whereas most larger sizes can be made in any font regardless of if it's on our list. If you have your own font or your own artwork then we can accommodate that and there is usually no price difference. Send artwork in illustrator vector outlines to sales@signlettersource.com and include as much details about size, thickness, finish, mounts etc for a quick custom quote.

Type in the letters, numbers and punctuation, exactly as you want it to read when you make your sign. For multiple line signs, there are 3 other lines that will become available. What you type is what you will get. If lower case letters typed and the size is too small or lower case is not available in the chosen font, those letters will automatically convert to upper case and should convert back again when you change the height or size to something that has availability. What you type here will display in the preview area to the left along with correct real world dimensions. All letters are sent to you as individual letters and numbers, not as a ready made sign.

If you only want a series of numbers or numbers and letters for doors, then type them all in on line 1. Separate with a space but do not add comma's There is no need to add one number for each line.

If you want larger leading capitals in a phrase then you have to add the larger caps on a separate line.

Cut letters can be finished in a variety of ways. Please refer to the choices at the bottom of this page. Some finishes can only be done on certain sizes or thickness of letters. Painted finishes can be the ones on our picker or for a small fee can be any pantone, sherwin Williams or PPG color.

Cut letters can be configured in various ways but they are dependent on the finish of the letters and the heights and fonts also. We try to present the choices available for the choices you have made elsewhere in this ordering page.

The factory recommends 2" of stud in the wall plus the amount of wall standoff desired, if any. In most cases it is best to leave this option at factory set unless you know you want longer studs for a special purpose installation

Wall standoff refers to how far you want the back of the letters to be from the surface you are mounting them on. The factory will calculate the correct stud length and if choosing this option then it's best to leave the stud length at factory set.

When a quantity is set(such as for 2 sides of a sign), you only pay for and get one mounting pattern UNLESS the mount type is stud, combination or combination all. In that case you will need a mounting pattern for each set because the stud locations are never in the same position even when the letters are identical. This is due to the manufacturing process where the stud holes or mounting blocks are placed by hand after the letters are cut, cast or molded. The order totals will reflect this.