All our products are configurable and provide instant prices as you shop!
Formed plastic Arrows and lines. Arrows from 4" to 24" and lines and bars 12" to 60". Used for underlines and directional signage.
Ready to Ship in about 3-5 Business Days.
© 2019. Montana Lettering Inc.
Click on image to select
Aligns the display output(below) either left, right or center justified. This image is passed along in your order. Alignment requires 2 or more lines of text. TIP: You can also indent text by using spaces before and after the text to move the line text to the left or right.
Sets a background to the preview so that you can judge the text color against a background color. Backgrounds are not provided in the order. All letters come as individual letters or numbers. We do not make the sign, we help you to make your sign.
Molded or cast letters come in standard and custom sizes. The standard sizes contain only the sizes for which the molds are already made which lessens the cost and production time. Custom sizes are available in 1" increments from 4" to 36" and you will only see this when you have selected a custom font from the list. If your font is a standard font then the sizes shown are the only ones available for that standard font. Changinng the size effects the mounts available and as well as providing a new preview image at the new size. It's very intuitive if you give it a bit of your time.
Molded and cast letters have set letter depths which vary based on the letter size. You can see the letter depths for each line on the information bar under this line. As you select different fonts or sizes this value will change accordingly.
Choose a symbol from the popover list. Configure it's size and the image below will change to provide its dimensions.
There are 29 CAB colors which is the color of the material through and through. These are all gloss colors and are the cheapest option available. Beyond that there are 46 painted colors which are weatherproof and UV resistant and painted with quality architectural paints from PPG, the same folks that make automobile paint. Painting is performed in state of the art paint booths and are buffed to a professional finish like you would expect on your car. Selecting a painted finish adds 30% to the cost but gives you the ability to have gloss levels including full gloss, semi-gloss, satin or matte. If you need a custom color we can do that too. Just provide your Pantone PMS# or a Sherwin Williams, Baer or other color number and name and we will special mix the paint. Adds $20 per color mix to the job.
Molded and cast letters are hollow in the back and require some form of mounting hardware to properly install them. We populate the selection box with the available mounts based on the sizes you have selected.
The factory recommends 2" of stud in the wall plus the amount of wall standoff desired, if any. In most cases it is best to leave this option at factory set unless you know you want longer studs for a special purpose installation
If wall standoff is required, ie: letter backs are not flush to wall surface, then its best to order a combination all mount which will give you adjustability. Specify in this box the distance the back of the letter should be from the wall.
For all stud type mounts you need a full size pattern shown above. This pattern cannot be ordered after the letters have shipped. The factory need the letters in hand to provide any form of pattern or guide.
We make no profit on the pattern. We sell the pattern at our cost which is $3.25 per letter. Our competition typically charge $4.50 per letter which is the MSRP. Patterns are not returnable.
When a quantity is set(such as for 2 sides of a sign), you will need a seperate pattern for each set IF the mount type is stud or combination or combo all. You will be charged for (x) patterns plus (x) copies of the letters.
Lines or bars come in various lengths and interlock together. Closed bars should be used on the ends of lines and open bars in the middle sections. Ordering a single bar of any length will be closed on both ends unless you order open end bars. The width of the bars can be specified from 1" to 4"