Cast Aluminum and Cast Bronze Caduceus Symbol, Dental Symbol, Optometry Symbol, Chiropractic Symbol, Veterinary Symbol, Symbol of Life, Staff of Asclepius, Mortar and Pestle Symbol, Rx Symbol, Red Cross Symbol are made with the same attention to detail found on cast bronze letters and cast aluminum letters and numbers. In service both internationally and in all 50 States of the USA, cast alumnum and bronze letters, symbols and logos offer unbeatable finish at the lowest cost.
Ready to Ship in about 10 Business Days.
The production time is variable depending on the work load at the factory. Most times your product will ship in the given time frame or sooner but always allow for the worst case. Business days are defined as Monday to Friday excepting all public and federal holidays. The factory will not put anyone ahead of the queue not even if you pay for it but they will allow us to specify a "must ship" date and will tell us before accepting the order for production if they cannot make the date. This is done to prevent favoritism but the logic goes that if they agree to the must ship date they will expect you to reciprocate with expedited shipping which can get VERY expensive. We cannot even estimate the cost for expedited shipping due to the custom nature of the products being ordered. If your order is time dependent you must notify us during the order process at checkout in the comments box. If you do not notify us then we put you in the standard production queue.
(Click Color To Select)
NOTE: Painted colors add 10% to the letter cost.
Show Painted Colors -adds 10%
Show Standard Colors
(Click Symbol To Select)
*NOTE*: Options on this list will become enabled/disabled depending on selections made as to letter size and thickness and type of finish. Options become enabled when minimum requirements for production are met.
Click on image to select
Aligns the display output(below) either left, right or center justified. This image is passed along in your order. Alignment requires 2 or more lines of text. TIP: You can also indent text by using spaces before and after the text to move the line text to the left or right.
Sets a background to the preview so that you can judge the text color against a background color. Backgrounds are not provided in the order. All letters come as individual letters or numbers. We do not make the sign, we help you to make your sign.
Molded or cast letters come in standard and custom sizes. The standard sizes contain only the sizes for which the molds are already made which lessens the cost and production time. Custom sizes are available in 1" increments from 4" to 36" and you will only see this when you have selected a custom font from the list. If your font is a standard font then the sizes shown are the only ones available for that standard font. Changinng the size effects the mounts available and as well as providing a new preview image at the new size. It's very intuitive if you give it a bit of your time.
Molded and cast letters have set letter depths which vary based on the letter size. You can see the letter depths for each line on the information bar under this line. As you select different fonts or sizes this value will change accordingly.
Choose a symbol from the popover list.
There are 46 Painted colors, 6 Anodized colors, 1 powdercoated rust finish and brushed, bead blasted and buffed finishes available. Anodized finishes are impervious to weather, UV and corrossion and do not need a clear coat. All painted colors are weatherproof and UV resistant and painted with quality architectural paints from PPG, the same folks that make automobile paint. Painting is performed in state of the art paint booths and are buffed to a professional finish like you would expect on your car. Selecting a painted finish adds 30% to the cost but gives you the ability to have gloss levels including full gloss, semi-gloss, satin or matte. If you need a custom color we can do that too. Just provide your Pantone PMS# or a Sherwin Williams, Baer or other color number and name and we will special mix the paint. Adds $20 per color mix to the job.
Molded and cast letters are hollow in the back and require some form of mounting hardware to properly install them. We populate the selection box with the available mounts based on the sizes you have selected.
The factory recommends 2" of stud in the wall plus the amount of wall standoff desired, if any. In most cases it is best to leave this option at factory set unless you know you want longer studs for a special purpose installation
If wall standoff is required, ie: letter backs are not flush to wall surface, then its best to order a combination all mount which will give you adjustability. Specify in this box the distance the back of the letter should be from the wall.
For all stud type mounts you need a full size pattern shown above. This pattern cannot be ordered after the letters have shipped. The factory need the letters in hand to provide any form of pattern or guide.
We make no profit on the pattern. We sell the pattern at our cost which is $3.25 per letter. Our competition typically charge $4.50 per letter which is the MSRP. Patterns are not returnable.
When a quantity is set(such as for 2 sides of a sign), you will need a seperate pattern for each set IF the mount type is stud or combination or combo all. You will be charged for (x) patterns plus (x) copies of the letters.
Lines or bars come in various lengths and interlock together. Closed bars should be used on the ends of lines and open bars in the middle sections. Ordering a single bar of any length will be closed on both ends unless you order open end bars. The width of the bars can be specified from 1" to 4"