INJECTION MOLDED "MINNESOTA" LETTERS

PAD MOUNT

Plastic pads extending about 1/8" beyond the back of letter allow you to use silicon on the pads and glue to a flat surface. Installed with use of a pounce pattern or spacing guide. Not recommended for outdoor installations or uneven surfaces.

STUD MOUNT

This is the default stud mount. This option will have blocks glued in the backs of the letters that accept threaded rods(studs). Drill corresponding holes in the mounting surface using the drilling pattern available at extra cost, then fill the holes and coat the studs with silicon and push the letter to the wall.

COMBO MOUNT

The combination all mount is stud through pad on all points. This gives you adjustability on every stud and is useful for irregular surfaces such as corrugated metal buildings, lap siding, stone walls or anywhere you want a standoff from the wall that is adjustable during installation.

COMBO ALL MOUNT

The combination all mount is stud through pad on all points. This gives you adjustability on every stud and is useful for irregular surfaces such as corrugated metal buildings, lap siding, stone walls or anywhere you want a standoff from the wall that is adjustable during installation.