Fabricated Stainless Steel Sign Letters, Reverse Channel letters for LED halo Lighting. | Free Shipping $100+ @ SignLetterSource.com

Step 1

Step 2

Step 3

Step 4

Step 5

Enter Letters - Numbers - Punctuation

Choose a Style/Font

Uppercase Height

Letter Depth

Color / Finish

Line 1

+

Line 2

+

Line 3

+

Line 4

+

Matte Paint (+15% except metallics) Show tooltip help

INFO	Letter Depth	Uppercase Price	Lowercase Price	Line Total	Pattern Price	Total Price	GRAND TOTAL
Line 1						$0.00	$0.00
Line 2						$0.00
Line 3						$0.00
Line 4						$0.00

	Alignment		Backgrounds (design use only)	Update Display Automatically

Displays your letters in the chosen font

Step 6: Select Mounting Hardware and Mounting Pattern
	Mounting Choices	Stud Length	Spacer/Stand Off	Mounting Pattern
Line 1
Line 2
Line 3
Line 4

Total Characters
Cart Subtotal
Total Cost for Characters
Mounting Pattern
Total this page
Qty

*Quantity is applied to ALL lines

Gemini Fabricated Stainless Steel Metal Colors

Interior/Exterior Aluminum

1888 Satin Stainless Steel	1188 Polished Stainless Steel	1444 Satin Gold Titanium	1144 Polished Gold Titanium

Baked Enamel Painted Colors for Aluminum Only

5687 White	4310 Dove Grey	0209 Grey	2025 Black	2718 Ivory	8090 Safety Green	2037 Lemon Yellow	2000 Yellow

0217 Citrus Yellow	0218 Sundance Yellow	0254 Schoolbus Yellow	2119 Orange	2662 Red Orange	0256 Rampart Orange	2793 Red	1875 Brick Red

2280 Black Cherry	2240 Maroon	2410 Magenta	2287 Purple	0246 Violet Toner	2767 Midnight Blue	2050 Dark Blue	2860 Med. Blue

3000 Blue	3555 Spring Green	0259 Federal Green	0222 Emerald Green	2108 Light Green	2030 Dark Green	2162 Hunter Green	0400 Brilliant Gold

2756 Metallic Gold	0401 Aztec Gold	0253 Copper	0402 Aztec Copper	2418 Brown	0312 Med Bronze	0314 Old Copper	3130 Duranodic Bronze
	*Disclaimer: Colors on a computer monitor vary widely between monitors. Actual paint color, hue and vibrance may differ than that shown on your monitor. We will not be responsible for color interpretations based on monitor or user. Sample color swatches are NOT available. If you need a color sample you will have to buy a letter in the color you wish to see. Bear in mind that color batches can have some variation between batches of color mixed at the factory. Also bear in mind that we serve many manufacturers and that a color may vary slightly between manufacturer's. Product does not carry a return value for colors that do not meet your specifications when delivered. PANTONE, PPG and SHERWIN WILLIAMS color matching is available on request. Some manufacturer's charge a per color matching fee.
8886 Metallic Silver

BLOCK FONTS (Lowest Price per letter)	SQUARE SERIF FONTS (2nd price tier)






























	ALL OTHER FONTS (Highest price)





ROUNDED SERIF FONTS (3rd Price tier)













Custom fonts can be fabricated

Holding space for price table

Installation Hardware

	Strap Mount: Thin metal straps slightly recessed into back and soldered to return. Stud boss soldered to strap to receive threaded studs. The strap helps strengthen returns of letter. This is the default mounting method for fabricated letters. Not for use with LED lighting systems as shadowing may occur.
	Side Mount: Stainless "L" bracket with holes and bosses to receive threaded studs is glued to inside return. Due to bracket size, a minimum 6" high and 1" deep letter is required.
	Shadow Free Stud: Metal stud blocks glued to inside of can. Threaded to receive 10-24 studs. Available on letters up to 12" high. Letters greater than 12" use strap mount placed against face to achieve the same shadow free effect. Smaller letters could also use this mount to receive pads with studs for a flush pad mount.
	Lexan Back: Lexan backs are laser cut to fit within the inside of the return. This is not a perfect"puzzle" fit–but is close. "L" brackets are glued to the inside return of the can. The lexan is attached to the "L" bracket with stainless flat head screws. 6"-24" high letters use .118" thick lexan. Above 24" use .236" lexan. Lexan is not perfectly flush to back of letter. Holes are drilled through lexan to allow for mounting studs into "L" brackets.
	Steel Back: Steel backs are laser cut to fit within the inside of the return. This is not a perfect"puzzle" fit–but is close. "L" brackets are glued to the inside return of the can. The steel is attached to the "L" bracket in 1 of 2 ways: 1. Loose tacked (welded) which is not removable. 2. Holes drilled through steel to allow for pan head screw into "L" bracket. Both methods have holes drilled for mounting studs. Backs are available raw, finished or painted steel.
	Removable Can for LED: Image shown with optional LEDs. Same rules and construction as lexan back with the exception of the "L" brackets. "L" brackets are held in place with removable pan head screws (not glued). Side screws pass through holes that are drilled into returns. When lighting with LEDs the can must be removable from the lexan. LEDs are attached to inside of lexan back. Note: Painting inside of can for optimal LED reflectivity is an additional 10%.
	Bottom Stud: Metal "L" bracket glued to inside of face& return. Holes and bosses in bottom/top to receive threaded studs. Due to bracket size a minimum 6" high, 1" deep letter is required. Letters over 12" will require our "Engineered Stud". Rounded letters will require some flattening. Pricing includes a lexan or steel back. Engineered Stud: Metal "L" bracket glued to inside of face & return. Holes and bosses in bottom/ top to receive threaded studs. Letters 12"-24 require a minimum 1.5" depth, letters over 24" will require a minimum 2.5" depth. Backs are also included to provide added structural support. Stud diameter may also vary per architect specification. Rounded letters will require flattening.

Gemini Fabricated Letters

Fabricated Stainless Steel Letters

Fabricated Stainless Steel

Fabricated Stainless Steel Letters are perfect architectural letters for retail or other areas where high-end quality fabrication is an absolute must.

The Process:

Whether your project requires single-directional polished stainless steel or premium titanium coated stainless steel; your fabricated sign will be reproduced to exact specifications. Beginning with your artwork or any standard style, the process uses precision-guided lasers, routers or jigsaws to cut the requested letter, logo or shapes from thin gauge sheets of stainless steel or titanium-coated stainless steel. For most letters, 22-gauge material provides the proper balance of strength and weight, while some larger sign letters require 20-gauge material to provide adequate strength. The letter returns are produced from narrow band material or cut to size based on the desired letter depth and bent to the contour of the laser-cut faces to produce a hollow-backed letter with 90º angle edges that have clean, crisp corners and hand-soldered using a lead-free silver solder.

Fabricated Sign Letters can also be used in combination with buyer supplied neon lights or LEDs to create internally illuminated signage. Common users of these “halo lit” letters with neon and LED lighting include museums, office
complexes, financial institutions and other buildings that require an extremely high-end look for their signage.

LED or Neon Lighting is NOT SUPPLIED or Available from us.

Available in a wide variety of finishes such as brushed, polished or painted, Fabricated Stainless Steel Letters can be produced to your required depth and size. Gold Titanium coating is also available to provide the look of brass at a fraction of the cost..

Custom painted colors are also available using PMS matching or using a manufactures color such as Sherwin Williams, PPG, etc.