//copyright (Montana Wooden Lettering Inc) 1/1/2004  All Rights Reserved 
<!--


var dArr =new Array();
dArr[0] =new Array();  //crosses
dArr[0][0]=new Array(12,98,218);
dArr[0][1]=new Array(15,117,262);
dArr[0][2]=new Array(18,156,346);
dArr[0][3]=new Array(24,195,434);

dArr[1] =new Array(); // stars
dArr[1][0]=new Array(4,37,71);
dArr[1][1]=new Array(5,43,86);
dArr[1][2]=new Array(6,50,98);
dArr[1][3]=new Array(7,63,122);
dArr[1][4]=new Array(8,74,146);
dArr[1][5]=new Array(10,83,162);
dArr[1][6]=new Array(12,89,176);
dArr[1][7]=new Array(18,148,293);
dArr[1][8]=new Array(24,235,465);

dArr[2] =new Array(); // Flat face Medical & law
dArr[2][0]=new Array(12,89,197);
dArr[2][1]=new Array(15,106,238);
dArr[2][2]=new Array(18,142,316);
dArr[2][3]=new Array(24,177,395);

dArr[3] =new Array(); // Round & sculptured face Medical & law
dArr[3][0]=new Array(12,120,266);
dArr[3][1]=new Array(15,144,321);
dArr[3][2]=new Array(18,185,410);
dArr[3][3]=new Array(24,231,513);

dArr[4] =new Array();
dArr[4][0]=new Array(1,15,30);
dArr[4][1]=new Array(1.5,19,38);
dArr[4][2]=new Array(2,25,50);
dArr[4][3]=new Array(3,32,64);
dArr[4][4]=new Array(4,39,77);
dArr[4][5]=new Array(6,57,114);

var S = 0 // global for getSwatch()

// array for styles
var sArr =new Array();
sArr[0] =new Array();
sArr[0][0] =new Array('A-Standard Cross','1');
sArr[0][1] =new Array('B-Celtic Cross','2');
sArr[0][2] =new Array('C-Tapered Cross','3');
sArr[0][3] =new Array('D-Alter Cross','4');
sArr[0][4] =new Array('E-Star of David','5');

sArr[1] =new Array();
sArr[1][0] =new Array('Prismatic Star','6');

sArr[2] =new Array();
sArr[2][0] =new Array('Flat Face Rx','13');
sArr[2][1] =new Array('Red Cross','14');
sArr[2][2] =new Array('Mortar and Pestle','11');
sArr[2][3] =new Array('Scales of Justice','7');

sArr[3] =new Array();
sArr[3][0] =new Array('A-Caduceus','15');
sArr[3][1] =new Array('B-Dental','18');
sArr[3][2] =new Array('C-Veterinary','19');
sArr[3][3] =new Array('D-Optometry','16');
sArr[3][4] =new Array('E-Asclepius','20');
sArr[3][5] =new Array('F-Chiropractic','17');
sArr[3][6] =new Array('G-Symbol of Life','21');
sArr[3][7] =new Array('H-Round Face Rx','12');

sArr[4] =new Array();
sArr[4][0] =new Array('Registration Mark','9');


// new array for templates
var pArr =new Array();
pArr[0] =new Array();
pArr[0][0] =new Array('No Template','0__mounts/yuk.png');
pArr[0][1] =new Array('Stud Template','3__mounts/studtemplate.png');
pArr[0][3] =new Array('Free Spacing Tape','2__mounts/spacingtape.png');


var mtArr =new Array();
mtArr[0] =new Array();
mtArr[0][0]=new Array("Flush Stud Mount","00__mounts/cast_flush_s.gif")
mtArr[0][1]=new Array("Projected Jam Nut","01__mounts/cast_jamnut_s.gif")
mtArr[0][2]=new Array("Projected Spacer","02__mounts/cast_spacer_s.gif")
mtArr[0][3]=new Array("Corrugated Mount","03__mounts/cast_corrugated_s.gif")
mtArr[0][4]=new Array("Flat Metal Mount","04__mounts/cast_flatmetal_s.gif")


var F =
'Religious~religious/'+
'Stars~stars/'+
'Flat Face Medical & Law~medical1/'+
'Sculptured & Round Face Medical~medical2/'+
'Registration Mark~regmark';


var mount =new Array();
mount[0]="<p>FLUSH MOUNT : Use a mounting pattern and drill holes where indicated for studs. Studs are set into holes with silicon adhesive. There is no gap between the letter and the mounting surface. Specify stud length if required.</p>";
mount[1]="<p>PROJECTED JAMB NUTS : Nuts are threaded onto the studs and locked against each other to provide a stand-off from the mounting surface. Use for uneven surfaces. Studs are set in silicone adhesive as per flush mounts. Mounting Template Required!</p>";
mount[2]="<p>PROJECTED SPACER MOUNT : Pre-cut spacers are used to provide an equal distanced stand-off of the letter from the mounting surface. Use for even surfaces. Studs are set in silicone adhesive as per flush mounts. Mounting Template Required!</p>";
mount[3]="<p>CORRUGATED MOUNT : Use for mounting to corrugated surfaces such as tin siding. Access to the back side of the mounting surface required to attach nuts. Mounting Template Required!</p>";
mount[4]="<p>FLAT METAL WALL MOUNT : Use for mounting to flat metal surfaces such as aluminum sheet. Access to the back side of the mounting surface required to attach nuts. Mounting Template Required!</p>";


var patrn =new Array();
patrn[0]="<p>Templates keep your sign copy properly spaced and vertically aligned. In addition, many folks make the mistake of placing all letters on a single baseline. Did you know that on most fonts rounded letters such as S-C-G-O are usually taller than flat top letters like E-A-I ? The human eye percieves those round letters to be smaller than they actually are. They are normally centerlined on the flat top letters. With the exception of the free spacing tape, mounting patterns take care of this for you.</p>";
patrn[1]="<p>This type of template is best used for pad mounts and no mounts. It comes full size of your sign copy and each letter is perforated. You place it on the wall, Tape and Level it, then rub chalk on it to leave a chalk outline for positioning each letter.<br><br>Only one pattern is needed for multiple copies of the same sign.<br>Pounce patterns do NOT have stud locations marked on them.";
patrn[2]="<p>The spacing tape is free. HOWEVER, this tape only gives you the suggested distance each letter should be mounted in relation to the previous one.  It does not take into account getting your letters vertically correct, nor does it show you correct horizontal alignment. In addition, lower case descending letters such as a 'y' will have to be aligned by eye both vertically and horizontally.</p>";
patrn[3]="<p>The stud pattern is the prefered mounting template for all stud and combo type mounts. This pattern is made by hand at the factory and cannot be ordered later without returning the letters. The pattern not only is a full size sign alignment guide but also has the studs marked for each letter. Finding the drilling position for blind studs without a template will be most frustrating and can lead to a bad looking sign.<br> NOTE: Multiple sets of the same sign require multiple patterns as even identical letters will have different stud locations.</p>";

fgCols="~1855/647A3C~1848/009CC9~1893/EE1108~1862/F24024~1819/F65507~1800/FBD100~1838/FFFFFF~3555/647A3C~4660/F7D1AC~5687/FFFFFF~4310/918E95~0209/999999~2025/000000~2718/F9E7C3~0207/EEE1D1~2037/FAD900~2000/FBD100~0217/FDEC20~0218/FFD34C~0254/D8940B~2119/F65507~2662/F24024~0256/DB5607~2793/EE1108~0214/B92E03~2240/AB0E17~2410/F63C87~2287/3E174E~0246/928FC5~2767/201A32~2050/13308C~2860/1D54D3~3000/3996F5~2648/009CC9~3210/64D1CB~2108/438120~0222/238820~2030/305C27~0259/227527~2162/283931~2418/563019~2222/F2FFFF~7138/F2F2F2~3493/BE0C08~3450/255E71~6366/BF3E29~3120/7F6647~2146/EAD09D~2225/F2FFFF~2283/970E0B~2280/533D40~2051/285A98~2114/0A2D9F~8090/C2D346~5425/657A81~6371/D39D43~2756/A07040~0401/D39003~0253/C07764~0402/945103~0312/7F654C~0314/836158~3130/3D3332~8886/BEB3B7";


//-->